|
|
| Introduction :: Data Search Options :: Water System Search :: DWS Home :: DWS Rules |
OHA Drinking Water Services
Contact Report Details |
|||
| PWS ID: | OR41 06137 | ||
| PWS Name: | THE FALLS AT CAMPER COVE | ||
| Who Was Contacted: | Melissa Weeden | ||
| Contact Phone: | 503-664-4364 (Email address hidden) | ||
| Contact Date: | 04/20/2023 | ||
| Contacted By: | CRAIG, JAIME (TILLAMOOK COUNTY) | ||
| Contact Method/Location: | |||
| Assistance Type: | WATER QUALITY ALERT RESPONSE | ||
| Reasons: | Coliform |
||
| Details: | The coliform sample taken at the shop well hose bib came back positive for Coliform at the Falls at Camper Cove. GWR: 1 Triggered sample(s) to be taken and reported 04/18/2023 - 04/29/2023 1 at SRC-AA - WELL #1 one sample ----- TCR: 3 Repeat sample(s) within 24 hours of a TC+ Routine Sample to be reported 04/19/2023 - 04/29/2023 at DIST-A If this is the first positive sample (TC+ or EC+) they have had in the month, advise the operator to collect 3 repeat samples within 24 hours of notification from the lab, if possible. No corrective action should be completed prior to collecting repeats. The samples should be collected according to their coliform sampling plan. Repeat samples are to be collected at these locations, at a minimum: a) One at the site of the original positive routine sample, b) One within five (5) connections upstream, c) One within five (5) connections downstream. Sample can be collected at sites other than b and c above (such as a reservoir outlet) if approved by the regulating agency and incorporated into the sampling plan. For routine EC+ samples, DMCE will send a letter to the system reminding them to collect repeats and report them within 10 days. Repeat results must be submitted to DWS within 10 days of the detection. To avoid sampling errors: Using a non-swivel faucet, remove any aerator, screen, hose, or other attachment and flush for 3-5 minutes. Use only sample bottles provided by the lab specifically for bacteriological sampling. Don’t open the sample bottle until the moment of filling and don’t touch the inside or lid of the bottle. Reduce the water flow to a steady stream and gently fill the bottle, leaving an air space of at least ½ inch at the top. Replace the cap immediately. Label the sample bottle with all pertinent information including system name and ID number; date, time and location of sample; name of person collecting the sample; sample type (If from distribution, ‘routine’, ‘repeat’, or ‘special.’ If direct |
||
| Associated Alerts: | TCR-285 - 04/20/2023 - COLIFORM (TCR) |
||