Abbreviations: MCL = Maximum contaminant level, MRL = Minimum reporting level, ND = Not detected at the minimum reporting level, PFAS = Per- and polyfluoroalkyl substances. Analytes with an MCL are in bold. Sample results detected above the MCL are in bold red.
Water systems must be in compliance with the MCL by 2029. Sample results can be used for compliance when their MRL meets the requirements of the PFAS rule. Results that cannot be used for compliance are shaded gray and italicized.
Initial Monitoring
This water system is part of the OHA PFAS Sampling Project. DEQ will collect the first sample from each active entry point by the end of July 2026. The water system is responsible for collecting additional samples needed to meet the initial monitoring requirements.
EP ID
Entry point name
Water type
Availability
Frequency
Schedule begin
Schedule end
First quarter or First sample
Second quarter or Second sample
Third quarter
Fourth quarter
EP-A
EP FOR WELL
GW
Permanent
2 samples
1/1/2023
N/A
N/A
For each active entry point served by groundwater, collect 2 consecutive samples within a 12-month period with samples collected 5 to 7 months apart.
Sample Summaries
For compliance?
EP ID
Entry point name
Sample date
# Detections
# MCL exceedances
Sample ID
Sample Results
For compliance?
EP ID
Entry point name
Sample date
Received date
Analyte code
Analyte abbreviation
Analyte name
Result (ng/L)
MCL (ng/L)
MRL (ng/L)
Sample ID
Lab ID
Lab name
Analysis method
Method name
TINWSF ISN
TSASAMPL ISN
TSASAR ISN
SelectDataSet
SelectAnalyte
SelectDetects
SelectLabID
SelectLabName
SelectMethod
SelectMethodName
More information for this water system: SDWIS ID 2105
